The SPA² now offers versatile new alarm options that allow the user to set up more specific alarm functions.

• The Band Alarm combines the High and the Low Trip Alarms into one alarm to warn of a process that has left its normal operating conditions.
• The updated rate-of-change alarm now allows the operator to alarm when PV is rising too rapidly, falling too rapidly or if either process condition occurs. 
• The Stuck Input Alarm monitors the input with respect to time and trips when that input hasn’t changed by a user-selected rate (Delta) over a user selected time period (Delta Time).
• The Fault alarm includes: Input Saturation to identify when the input signal exceeds 110% of calibrated input range, an Out-of-Range alarm, and broken wire alarm.
• A Copy Alarm setting allows the user to duplicate the exact setting of any other alarm.

The SPA² provides users the ability to setup the alarm using on-board controls or the company’s free updated PC Configuration Software. 

Each individual alarm trip relay may still be programmed as a high or low limit process alarm or configured for simple on-off control utilizing a deadband range of 0-00%

 An updated manual combines both the TRPG and HLPRG SPA² input versions into a single manual. The new SPA² has the same reliability and quality expected from Moore Industries with the same great features including the ability to accept input signals from transmitters, temperature sensors, resistance and potentiometer devices, and direct millivolt sources. 

Do you want more information? Download the data sheet. Or visit the catalog.

Need to get price or availability or have a technical question?

Send us a message using E-Help.

The highly versatile SIY programs to accept a wide range of current or voltage inputs. It outputs an isolated, proportional, 4-20mA signal. As a flexible analog/digital hybrid, this 2-wire (loop-powered) transmitter programs in seconds to handle a wide range of important signal interface applications.

• Isolate Signals to stop erratic process measurements caused by ground loops
• Convert Signals so field instruments can interface directly with an indicator, recorder, DCS, PLC, or PC-based SCADA system
• Divert Signals so the output from one transmitter can be sent to two separate locations
• Protect Equipment and Signals by eliminating common electrical paths
• Boost Signals so that more instruments can be added to an overburdened loop
• Solve Bucking Power Supplies by stopping a conflict caused by a 4-wire transmitter and a DCS both trying to power the same process 

Do you want more information? Download the data sheet. Or visit the catalog.

Need to get price or availability or have a technical question?

Send us a message using E-Help.

Moore Industries has released a Rear Terminal Kit for the TDZ3 and STZ HP temperature transmitters. Sometimes very large gauge thermocouple wire is used and when the application requires dual input, fitting two large gauge leads into the same terminal can be problematic or lead to loose connections.

This terminal kit alleviates that by offering large terminal field-side connections for large gauge wire and pre-installed smaller gauge thermocouple wire for the transmitter connection.

The kit is available for thermocouple types J, K, T, E, and N. The downloadable installation sheet available at the link below also includes ordering information. You will need to order the kit for a specific thermocouple type, so be sure to specify which thermocouple you have. The part number format is 209-845x-00, where x is the thermocouple type.

The STZ, part of Moore Industries’ FS Functional Safety Series, is SIL2/3 capable. The STZ Functional Safety Dual Input Smart HART® Temperature Transmitters is an excellent addition for your SIS (Safety Instrumented System). It configures quickly and easily to accept a single or dual input from a wide array of sensors and analog devices:

• 14 RTD Types
• 9 Thermocouple Types
• Resistance and Potentiometer Devices
• Direct Millivolt Sources

Find out more information on the TDZ3 or the STZ or download the available installation document in PDF format.

Do you want more information? Download the data sheet. Or visit the catalog.

Need to get price or availability or have a technical question?

Send us a message using E-Help.