Rugged instrumentation for reliable measurement and control

Applications By Industry

Search Applications

Stream Precise Positioning Data from Electronic Valve Positioners

The ability to use existing industrial Ethernet and wireless networks in process manufacturing plants and automation facilities has made data exchange within a facility and even throughout global corporate networks easier than ever. Process and diagnostics data from smart HART digital field instruments is being shared with mid and higher-level control, asset management and data information systems without having to upgrade expensive process control systems.

At Moore Industries, we are seeing numerous customers using the HES HART to Ethernet Gateway System to collect and transmit valuable smart HART device data to these higher-level systems over Ethernet via MODBUS/TCP for predictive analysis and control decision-making.

In a recent application, a customer needed to control two valves that had Siemens smart HART positioners installed and had a further requirement to communicate actual valve position over Ethernet using MODBUS/TCP to their higher-level systems.

Stream Precise Positioning Data from Electronic Valve Positioners

Download the PDF file

Originally the customer wanted to use the Moore Industries model 535 or 545 PID Controllers to control the two valves in order to balance and/or limit each valve’s travel to maintain final pressure through the system, but they realized that the controller’s communication capability did not support Modbus/TCP as their DCS and Historian required.

Moreover, the higher-level monitoring systems wanted to monitor and record where actual stem positions currently were, not where the valve controller was driving them to via the 4-20mA signal.  This could only be obtained by reading the HART data from the smart positioners.

The HES 4-channel model was utilized to pick up the actual stem position HART data from the smart positioners and send it to the higher-level systems – no longer requiring the valve controller to communicate the CV (Controlled Variable), or desired stem position, output. The HES was an effective and economical solution that enabled the customer to take advantage of existing HART data from the positioners and share that critical data with their higher-level systems on their existing Ethernet infrastructure. 


Download Datasheet