Take a process input signal from a temperature, pressure, level, or flow transmitter loop and view real-time process status in rugged and hazardous field environments.
Detailed product data sheets are available in PDF format by clicking on the product names below. PDF files require Adobe Reader, which can be downloaded free from
Adobe's Web site
.
Featured Interface Solutions
Model
Input
Output
Power
Mounting
PSD
PC-Programmable
4-20mA Loop Display
Get Data Sheet
psd.pdf (174K )
4-20mA
from Temperature, Pressure, Level or Flow Transmitter
Sets Up in Less Than a Minute
to display a percent or any engineering unit
Square Root and Custom Curves are User-Selectable
Exceptionally Low
2.3 Volts Loop-Powered
Field Mount
Hockey-Puck
(head, pipe, DIN rail, relay-track, surface, and explosion-proof)
SPD
Programmable Field-Mount Loop Display (NEMA 4X, IP66)
Get Data Sheet
spd.pdf (341K )
4-20mA
from Temperature, Pressure, Level or Flow Transmitter
Sets Up in Less Than a Minute
to display a percent or any engineering unit
Square Root and Custom Curves are User-Configurable
Dual Relay Outputs
Configurable for High and/or Low Process Alarms
2-Wire, 2.3 Volts Loop-Powered
4-Wire, Line-Powered (24DC)
Field Mount NEMA 4X, IP 66 Housing
(pipe and surface mount)
PPM
Programmable AC Power Monitor and Display
Get Data Sheet
ppm.pdf (287K )
Current
5A
High-Contrast, Backlit Display with Wide Viewing Angle Provides 3 Lines of Power-Measurement Data
Relay Outputs
Standard two-pulse discrete outputs represent KWh and kvarh or KWh and kVAh
Optional Fieldbus Output
MODBUS RTU digital communication for reading multiple power-measurement parameters at a monitoring/control system.
110AC auxiliary power, 45-65Hz
230AC auxiliary power, 45-65Hz
High-Density Panel-Mount Housing
Voltage
400Vac L-L, 3 Phase, 3-Wire
230Vac L-N, 3 Phase, 4-Wire
208Vac L-L, 3 Phase, 3-Wire
120Vac L-N, 3 Phase, 4-Wire
480Vac L-L, 3 Phase, 3-Wire
277Vac I-N, 3 Phase, 4-Wire
110Vac L-L, 3 Phase, 3-Wire
63Vac L-N, 3 Phase, 4-Wire
Programmable
Programs to accomodate user CTs and/or PT primaries
Additional Indicator and Display Capabilities
mA, mV, V, RTD, and T/C Inputs
2-Wire (Loop-Powered) and 4-Wire (Line-Powered)
Readout in Engineering Units and Percentage
Configurable Parameters
Square Root and Custom Curves
Low Power Consumption
Alarm and Analog Outputs
DIN Rail, Panel, Surface, Pipe, and Field-Mount
