For more information, go to Problem Solvers Application Ideas and Capabilities.

Detailed product data sheets are available in PDF format by clicking on the product names below. PDF files require Adobe Reader, which can be downloaded free from Adobe's Web site.

Featured Interface Solutions
Model	Input	Output	Power	Mounting
PPM Programmable AC Power Monitor and Display Get Data Sheet ppm.pdf (287K )	Current 5A	High-Contrast, Backlit Display with Wide Viewing Angle Provides 3 Lines of Power-Measurement Data Relay Outputs Standard two-pulse discrete outputs represent KWh and kvarh or KWh and kVAh Optional Quad Analog Outputs Four user-configurable analog outputs (4-20mA or 0-5V) proportional to power-measurement parameters at a monitoring/control system Optional Fieldbus Output MODBUS RTU digital communication for reading multiple power-measurement parameters at a monitoring/ control system	110AC auxiliary power, 45-65Hz 230AC auxiliary power, 45-65Hz	High-Density Panel-Mount Housing
	Voltage 400Vac L-L, 3 Phase, 3-Wire 230Vac L-N, 3 Phase, 4-Wire 208Vac L-L, 3 Phase, 3-Wire 120Vac L-N, 3 Phase, 4-Wire 480Vac L-L, 3 Phase, 3-Wire 277Vac I-N, 3 Phase, 4-Wire 110Vac L-L, 3 Phase, 3-Wire 63Vac L-N, 3 Phase, 4-Wire Programmable Programs to accomodate user CTs and/or PT primaries
PAC and PAV AC Current and Voltage Transducers Get Data Sheet pac_pav.pdf (118K )	Single and Triple Configurations 0-1A 0-2A 0-5A 0-10A 0-25A 0-90Vac 0-150Vac 0-300Vac 0-600Vac 90-150Vac 100-140Vac 110-130Vac 180-300Vac 200-280Vac 220-260Vac	Single and Triple Configurations 0-1mA 0-20mA 4-20mA 1-5Vdc	Self-Powered and Auxiliary-Powered	Rugged and Rustproof Aluminum (Surface, G-type, and Top Hat rails)
PVT, PWT, and PWV AC Power Transducers Get Data Sheet pvtpwt_v.pdf (175K )	1, 1½, 2, 2½, and 3 Element Configurations Voltage Input (Self-Powered) 50-80Vac 85-135Vac 170-300Vac 325-515Vac 425-675Vac (Auxiliary-Powered) 0-90Vac 0-150Vac 0-300Vac 0-575Vac 0-750Vac Current Input 0-1A 0-2A 0-5A 0-10A 0-25A	-1 to 1mA -10 to 10mA 4-20mA 1-5Vdc -5 to 5Vdc Bi-polar 4-20mA	Self-Powered and Auxiliary-Powered	Rugged and Rustproof Aluminum (Surface, G-type, and Top Hat rails)
Complementary AC Power Transducers and Monitors PDC DC Voltage Transducer and Ground Fault Detector This multifunction instrument simultaneously monitors both voltage level and ground faults in a floating battery system. It accepts a dc input and converts it to a 0-1mA or 4-20mA output. It also provides an alarm (contact closure) output when a ground fault is detected. Powered from the battery system, the PDC mounts on a surface or on a DIN rail. PCV, PVH, and PWH AC Energy Transducers These transducers continuously track the amount of power being consumed by an electric device or system. The PWH monitors RMS active power. The PVH measures RMS reactive power. The PCV is a combined-function instrument that calculates both RMS active power and RMS reactive power. These transducers mount on a surface or on a DIN rail.