Mode

Product Information

E-Help Express

Get product and application answers, installation assistance, technical information and quotes fast at E-HELP EXPRESS. Our application experts do the work for you!

 

Click Here to View the Moore Industries Interface Solution Line Card (3.76Mb)

Use the descriptions below to determine your general need. Then, click on the appropriate section for product selection guides, technical data and application information.









Main Product Selection Index




Functional Safety - IEC 61508

SIL 2 and SIL 3 Compliant instruments Certified to IEC 61508

Whether you are adding a single safety loop, have a few points to isolate, or need to augment a larger Safety Instrument System, Moore Industries FS Functional Safety Series of instruments are here to assist. Our FS Series products are designed and built in compliance with IEC 61508, the leading worldwide functional safety standard. In addition to our FS Series of products FMEDA (Failure Modes Effects and Diagnostic Analysis) reports are available on many of our products that are used in safety applications. Contact your Moore Industries Sales Representative to request safety data.

• Selection Guide and Product Information


Temperature Sensors, Transmitters and Assemblies

Take a weak, low-level RTD or thermocouple signal and convert it to a high-level analog signal more suitable for long-distance transmission through a noisy plant, and ready for direct interface with an indicator, recorder, PLC, DCS, or PC-based SCADA system.

• Selection Guide and Product Information
• Applications


Limit Alarm Trips and Switches

Provide on/off control, warn of trouble, or provide emergency shutdown by sending one or more alarm (relay) outputs when a monitored process signal falls outside of a selected high and/or low limit.

• Selection Guide and Product Information
• Applications


Signal Transmitters, Isolators and Converters

Convert, isolate, split, boost, and step down process signals so field instruments can interface directly with indicators, recorders, DCS, PLC, and PC-based SCADA systems.

• Selection Guide and Product Information
• Applications


Fieldbus Device Couplers and Power Supplies

Deliver a fast and easy way to connect, protect, power and terminate multiple fieldbus devices in FOUNDATION fieldbus™ and PROFIBUS PA segments.

• Selection Guide and Product Information

   

 

 


Process Controllers, Monitors and Backup Stations

Precisely control and monitor a temperature, pressure, level or flow process variable in batch and continuous processes, or back up critical or safety-related loops controlled by PLC, DCS and PC-based systems.

• Selection Guide and Product Information  

 


Smart HART® Loop Monitors and Interfaces

Break out analog and discrete process, status and diagnostic signals from smart multivariable transmitters and valves; monitor critical and safety-related loops; prevent costly false shutdowns; and warn of unwanted process or instrument fault conditions. 

• Selection Guide and Product Information
• Applications


Process Control and Distributed I/O Networks

Eliminate expensive point-to-point wires by sending just a few—or thousands of—process monitoring and control signals between the field and control room on one digital communication link.

• Selection Guide and Product Information
• Applications


I/P and P/I Converters

Convert a current signal to a pneumatic signal so a DCS, PLC, or PC can control a valve or actuator; or convert pneumatic signals to current signals so remote pneumatic devices can interface with electronic instruments and computer-based monitoring systems.

• Selection Guide and Product Information
• Applications


AC Power Transducers and Monitors

Schedule maintenance, identify inefficiencies, cut energy use, and prevent expensive damage to a load device like a motor, pump, heater, or mixer by accurately monitoring AC power use and trends. 

• Selection Guide and Product Information
• Applications


Indicators and Displays

Take a process input signal from a temperature, pressure, level, or flow transmitter loop and view real-time process status in rugged and hazardous field environments.

• Selection Guide and Product Information 

 


Instrument Enclosure Systems

Our versatile and economical instrument enclosure systems are your solution for safely mounting electronic instruments in the field. Featuring standard dimensions and mounting configurations, they are designed for use with our instruments, as well as protection of other manufacturers' equipment.

• Selection Guide and Product Information
• NEW! Custom Enclosure Solutions

  


Complementary Products and Accessories

We offer a wide range of other interface solutions that will help you meet your signal interface goals: 

  • Frequency and Pulse Converters
  • Instrument Surge Suppressors
  • Instrument Power Supplies
  • Integrators, Totalizers, and Counters
  • Linearizers and Characterizers
  • Enclosures, Racks, and Rails

 
• More Information