What's New


Blog


«December 2017»
MonTueWedThuFriSatSun
27282930123
45678910
11121314151617
18192021222324
25262728293031
1234567

New STZ Functional Safety Smart HART Temperature Transmitter Features Dual Input Sensor

New STZ Functional Safety Smart HART Temperature Transmitter Features Dual Input Sensor
Moore Industries has released the SIL 3-capable STZ Functional Safety Smart HART Temperature Transmitter family. Part of the FS FUNCTIONAL SAFETY SERIES, the STZ is a dependable and accurate temperature transmitter for use in Safety Instrumented Systems (SIS) where dangerous processes occur. The STZ has been certified by exida after rigorous evaluation to ensure conformance with strict IEC 61508:2010 standards for safety-related applications.
Published: September 29, 2015

Avoid Measurement Errors with Sensor Drift Detection

Avoid Measurement Errors with Sensor Drift Detection
Sensor drift is a common problem that can lead to inaccurate temperature measurement readings. It can be caused by several factors including environmental contamination, vibration or extreme temperature fluctuations. Because this drift causes the measurement error to get worse over time, it’s not possible to calibrate out the error. Traditionally, reducing inaccurate measurements caused by sensor drift has meant undertaking a regular and time-consuming preventative maintenance calibration program.
Published: September 21, 2015

E-HELP: Using the CPA to Create a Temperature Switch

E-HELP: Using the CPA to Create a Temperature Switch
Q: I am looking for a device to create a temperature switch. I currently use a simple temperature switch with a 230°F setting, but at times the temperature of the unit goes over 400°F briefly and destroys the switch. I need to be able to hook a thermocouple up to the device and program a setpoint (with no display required) and have a set of dry contacts open when the temperature rises above the setpoint.
Published: September 18, 2015

TCS Handles Up to 32 Measurements...And More

TCS Handles Up to 32 Measurements...And More
Moore Industries’ TCS Temperature Concentrator System is an ideal solution for low-cost temperature measurements. At its heart is the 16-channel, loop-powered (2-wire) TCM Temperature Concentrator Module. When two TCM modules are used in a TCS, up to 32 signals can be monitored over one twisted wire pair. The TCM is approved for use in hazardous areas (Div 2/Zone 2 and Div 1/Zone 0/1) and can be used with an HMC (HART to MODBUS RTU Converter) when communication with a MODBUS RTU master is required.

Published: September 15, 2015

E-HELP: 3-Wire Options with the WORM

E-HELP: 3-Wire Options with the WORM
Q: Does the WORM Flexible Sensor RTD have a 3-wire option? If not, can I eliminate the fourth wire by jumping two of the parallel wires together?
Published: September 3, 2015
RSS
First 3456789101112