What's New


Blog


«December 2017»
MonTueWedThuFriSatSun
27282930123
45678910
11121314151617
18192021222324
25262728293031
1234567

The SPA2 Automates a Sewage Treatment Sludge Pump Application

The SPA2 Automates a Sewage Treatment Sludge Pump Application

A sewage treatment plant needed to automate the start-stop of a large pump/grinder motor. The existing application used a tank level meter to signal the start-stop of the motor. However human intervention was frequently required to manually override the motor stop mechanism to allow it to continue to operate after the tank was emptied to assure the grinder portion was clear of old debris that would cause a possible stall on the next start. See how the SPA2 helped solve this problem.

Published: May 9, 2016

EHELP: Can we run a pneumatic chart recorder with an IPT2 or IPX2 Current-to-Pressure Transmitter?

EHELP: Can we run a pneumatic chart recorder with an IPT2 or IPX2 Current-to-Pressure Transmitter?

Q: We need to combine a new system for reading tank levels with an existing system by replacing a Hagan instrument with a new Rosemount device. However, we need to ensure we can still run an existing 3-27psi pneumatic chart recorder. We’re considering using an I/P, but aren’t sure if the 4-20mA output from the new transmitter can be piggybacked. Is this possible?

Published: May 3, 2016

Temperature Q&A with JR Madden: Process Temperature Measurements Shift With Outside Air Fluctuations

Temperature Q&A with JR Madden: Process Temperature Measurements Shift With Outside Air Fluctuations

Q. We have several short thermowells in our process, ranging from 2-inches to 6-inches. Our process is very stable, but we have noticed a temperature measurement shift when the outside air temperature rises or falls. We have tried calibration, but it still doesn’t correct the temperature swing we see. What would you suggest we change that will prevent these temperature swings?

Published: April 27, 2016

Moore Industries: A History of Innovation and Safety

Moore Industries: A History of Innovation and Safety

Moore Industries was founded in 1968 by Leonard W. Moore, who is still chairman of the board and has daily presence at the company’s North Hills, CA, headquarters. The company started out as a three-person operation in a garage in California, and now has offices worldwide in Australia, Belgium, China, The Netherlands and The United Kingdom. It is one of the last independent, privately owned instrument companies left in North America. 

Published: April 22, 2016

THZ3 & TDZ3 Smart HART Temperature Transmitter Replaces Retired THZ2 & TDZ2

THZ3 & TDZ3 Smart HART Temperature Transmitter Replaces Retired THZ2 & TDZ2

Moore Industries’ release of the THZand TDZ3, our next gen Smart HART temperature transmitters, officially replaced the retired THZand TDZ2 product lines. 

Moore Industries is no longer building or fulfilling orders placed for the THZand TDZ2, offering the THZ3 and TDZ3 in their place.

The 3rd generation temperature transmitters continue to offer our industry leading durability and reliability and introduce several new features that increase usability and functionality. The most significant feature is the new dual sensor input.

Published: April 15, 2016
RSS
First 234567891011 Last