What's New


Blog


«May 2018»
MonTueWedThuFriSatSun
30123456
78910111213
14151617181920
21222324252627
28293031123
45678910

E-HELP: Options for Sending a Signal to Four Different Locations

E-HELP: Options for Sending a Signal to Four Different Locations
Q: I am looking to take a signal from an analyzer and send the analog output signal to four different locations. Do you have a product that can help me with this?
Published: November 9, 2015

E-HELP: Converting a 4-20mA Logarithmic Signal Into a 4-20mA Linear Signal

E-HELP: Converting a 4-20mA Logarithmic Signal Into a 4-20mA Linear Signal
Q: We are in need of a signal converter that converts a 4-20mA logarithmic signal into a 4-20mA linear signal. We need one input and one output per device. Do any of your devices perform this function?
Published: October 13, 2015

Boosting Signals With the ECT

Boosting Signals With the ECT
Q: I have an application where we are getting a very weak 4-20mA signal back to the pump control panel. Will using an ECT unit (model ECT/4-20MA/4-20MA/117AC-TX (ECD) help to boost my signal at all?
Published: August 25, 2015

E-HELP: Splitter Options Depending on Your Power Source

E-HELP: Splitter Options Depending on Your Power Source
Q: We have been using the ECT-DIN in our applications where we need to split one 4-20mA input to two outputs. The model number for our current units is ECT/4-20MA/2X4-20MA/117AC/DIN. We now need to split a signal to three outputs. Do you have a product that will help us to do this?
Published: August 13, 2015

E-HELP: No Cabling Restrictions for FM Approvals on SIX

E-HELP: No Cabling Restrictions for FM Approvals on SIX
Q: I want to use an SIX Signal Isolator/Converter in a loop with a cable run of 1200’. Are there cable parameter values (i.e. maximum inductance/capacitance) that must be met in order to maintain the FM Non-Incendive certification? 
Published: July 20, 2015
RSS
123456789