What's New


Blog


«June 2018»
MonTueWedThuFriSatSun
28293031123
45678910
11121314151617
18192021222324
2526272829301
2345678

SPA2IS Controls and Monitors Wet Wells

Wastewater Treatment Application

SPA2IS Controls and Monitors Wet Wells
Municipalities often have several wet well locations around a city that pump waste from low lying areas up to main sewage veins that feed waste treatment plants.  Level instruments monitor the wet well level and controllers then engage the grinder pumps.  Since wet wells contain waste, volatile gasses such as methane require that these level instruments be rated for use in Class I, Div 1 environments.
Published: January 9, 2017

EHELP: SPA2 has SIL2 rating

EHELP: SPA2 has SIL2 rating
Q:  Does your SPA2 have a SIL 2 rating?
Published: November 29, 2016

Moore Industries Delivers When a Client in the UK Needed Several SPA2 Units Fast

Moore Industries Delivers When a Client in the UK Needed Several SPA2 Units Fast
An American multinational oil and gas corporation with a subsidiary located in the UK recently needed several SPA2 units as an urgent requirement for a project.  The client needed the SPA2s A.S.A.P. and Moore Industries delivered.
Published: November 22, 2016

EHELP: SPA Power Consumption

EHELP: SPA Power Consumption

Q:  We are considering ordering the Moore Industries SPA/0-100mV/2 PRG/U/-SOL [DIN]. Can we power it using 24VDC? If so, what is the power consumption and how do we terminate? Also, can you please confirm whether this unit is Class 1 Div2, group A,B,C,D?

Published: September 13, 2016

EHELP: SPA2 Tank Application

EHELP: SPA2 Tank Application

Q:  Do you have a signal alarm unit for a tank level application? I need it to meet the following requirements:

  • Input signal accepts 4-20mA.
  • Contacts opened or relay de-energized @ EL 208 ft.
  • Equipped with up to four alarm trip relays.  
  • Individually configured for: set point, high or low trip, normally open or normally close, failsafe or non-failsafe, and latching or non-latching.
  • ■ Deadbands adjustable over 100% of span.
  • ■ Output relay equipped with form C contacts rated at 10A, 120VAC.
  • ■ All operating parameters adjustable from the front panel keypad.
  • ■ Operate on a 120V 60 Hz power source
  • ■ Capable of supplying 24V dc power to two-wire transmitters.
Published: August 23, 2016
RSS
12345678