What's New


Blog


«August 2018»
MonTueWedThuFriSatSun
303112345
6789101112
13141516171819
20212223242526
272829303112
3456789

Remote I/O Solution for Boiler Temperature

Chemical and Specialty Chemical

Remote I/O Solution for Boiler Temperature

A large and long established chemical plant in New South Whales, Australia had been monitoring boiler tube thermocouples from multiple process boilers for more than 20 years. Originally all type K thermocouples were wired directly back to the DCS.  Over time they started to see drifting, errors and even out of range measurements due to the degradation of their long thermocouple extension wire runs. Learn how Moore Industries solved this problem.

Published: October 26, 2016

Temperature Measurement Solutions:

Getting Ambient Temperature Measurements

Temperature Measurement Solutions:

Measuring ambient temperatures is a common application with a number of solutions depending upon your use of the word “ambient”.

Published: October 19, 2016

Burner Management System Signal Splitter Application for a Pulp and Paper Mill

Pulp and Paper Industry

Burner Management System Signal Splitter Application for a Pulp and Paper Mill

A pulp and paper mill had a black liquor BMS (Burner Management System) that per NFPA 85 requires that its safety logic system be totally independent from other logic systems.  The challenge was they required that key temperature and pressure signals also get monitored and recorded by their BPCS (Basic Process Control System). Learn how Moore Industries solved this problem.

Published: September 28, 2016

Bearing Oil Sensor For High Vibration Environments

Bearing Oil Sensor For High Vibration Environments

A compressor at a chemical company vibrated severely – a common problem with compressors in any industry. An important sensor used to measure the compressor’s bearing oil temperature was a field-cuttable RTD that failed frequently, forcing a compressor shutdown each time. The Moore Industries WORM Flexible Temperature Sensors solved the problem.

Published: September 10, 2016

Donation Aids in Restoration of World War II PT Boat

Donation Aids in Restoration of World War II PT Boat

Moore Industries is doing its part to get an historic World War II boat back in the water. We've recently donated products that will help The National WWII Museum in New Orleans to restore a classic Higgins Industries PT (Patrol Torpedo) boat and make it seaworthy again.

Published: September 6, 2016
RSS
12345678910 Last