What's New


Blog


«October 2018»
MonTueWedThuFriSatSun
24252627282930
1234567
891011121314
15161718192021
22232425262728
2930311234

New STZ Functional Safety Smart HART Temperature Transmitter Features Dual Input Sensor

New STZ Functional Safety Smart HART Temperature Transmitter Features Dual Input Sensor
Moore Industries has released the SIL 3-capable STZ Functional Safety Smart HART Temperature Transmitter family. Part of the FS FUNCTIONAL SAFETY SERIES, the STZ is a dependable and accurate temperature transmitter for use in Safety Instrumented Systems (SIS) where dangerous processes occur. The STZ has been certified by exida after rigorous evaluation to ensure conformance with strict IEC 61508:2010 standards for safety-related applications.
Published: September 29, 2015

Get Warnings on Sensor Resistance Level Increases With the THZ3 and TDZ3

Get Warnings on Sensor Resistance Level Increases With the THZ3 and TDZ3
Under normal conditions, the loop resistance of a thermocouple will gradually change with temperature. However, exposure to extreme high temperatures can cause the resistance to increase at a substantial rate. This can be a sign of several issues within your sensor. For example, high temperatures can release impurities and chemicals within the thermocouple wire insulation that diffuses into the thermocouple metal and changes its characteristics. This can possibly lead to resistance increases as the thermocouple insulation material is breaking down.
Published: August 7, 2015

E-HELP: Single Point or Multidrop Configurations of the HCS

E-HELP: Single Point or Multidrop Configurations of the HCS

Q: We are interested in your HCS HART Concentrator System. What are the options for converting a single HART transmitter or for converting 16 transmitters with one unit?

Published: August 5, 2015

Get the Most Out of Your HART Devices

Get the Most Out of Your HART Devices

A study by the ARC Advisory Group in 2011 showed that 46 percent of all field devices installed worldwide communicate using the HART protocol. This is more than all fieldbus devices, proprietary protocols and 4-20 mA (analog/non-smart) combined. There’s a good chance that you are have HART-enabled devices in use at your plant or off-site location. The question is: are you getting the most from HART?

Published: July 17, 2015

Moore Industries Technology Reduces Legwork at Pulp and Paper Site

Moore Industries Technology Reduces Legwork at Pulp and Paper Site
State regulations required a major pulp and paper company to monitor and record daily effluent water rates. This requirement was being fulfilled by sending an employee from their main control site to a remotely located pond three times a day to manually record water levels. This process was inefficient, time-consuming and didn’t provide them with real-time data.
Published: June 29, 2015
RSS
123456