What's New


Blog


«December 2017»
MonTueWedThuFriSatSun
27282930123
45678910
11121314151617
18192021222324
25262728293031
1234567

Moore Industries Technology Reduces Legwork at Pulp and Paper Site

Moore Industries Technology Reduces Legwork at Pulp and Paper Site
State regulations required a major pulp and paper company to monitor and record daily effluent water rates. This requirement was being fulfilled by sending an employee from their main control site to a remotely located pond three times a day to manually record water levels. This process was inefficient, time-consuming and didn’t provide them with real-time data.
Published: June 29, 2015

E-HELP: Differential Temperature Measurement with Two RTDs

E-HELP: Differential Temperature Measurement with Two RTDs

Q: I am looking for a differential temperature transmitter. We have used the SPT in the past and know that it will work, but I don’t know if you can use two inputs of two different 4-wire RTDs with the SPT.

A: The SPT has only four input terminals; therefore the number of RTD wires is limited. For differential temperature one RTD can be a 3-wire and the other RTD can only be a 2-wire. The lead length compensation wire of the 3-wire connection compensates for the lead length of both RTDs. This is only useful if you make sure that all five wires have the identical resistance.

Published: June 16, 2015

The HCS as a Diagnostic Tool

The HCS as a Diagnostic Tool

We know it is easier for many customers to communicate using MODBUS RTU protocol than HART protocol and that makes the HCS HART® Concentrator System a very popular tool.

We also know customers want more diagnostic information so they can access the health of their processes and instrumentation. HART Command 48 is what the industry and the HCS uses to retrieve diagnostic information from the HART slave device, whether that is a transmitter or a valve positioner. The HCS will not implement Command 48 unless you turn on that feature by checking “Acquire Additional Status” on the HART tab of the configuration software.

Published: May 18, 2015

Configuration Video Tutorials Now on YouTube

Configuration Video Tutorials Now on YouTube
Last month we told you about a new video tutorial on the configuration of the THZ3 and TDZ3. We’ve now updated our YouTube page with video tutorials from Customer Service Director Bob Croughwell on how to use the included software to configure several of our most popular products:
Published: May 14, 2015

New Video Tutorial On the Use of PACTware with the THZ3 and TDZ3 Now Online

New Video Tutorial On the Use of PACTware with the THZ3 and TDZ3 Now Online

Moore Industries has released a new video showing how PACTware has been integrated into the range of monitoring and configuration options available with the new THZ3 and TDZ3 Dual Input Smart HART Temperature Transmitters. In the video below, Moore Industries’ Customer Service Director Bob Croughwell walks viewers through the steps needed to setup and monitor transmitters with PACTware.

Published: April 30, 2015
RSS
1234