What's New


Blog


«December 2017»
MonTueWedThuFriSatSun
27282930123
45678910
11121314151617
18192021222324
25262728293031
1234567

Temperature Q&A With JR Madden: Explosion-Proof Temperature Measurement

Temperature Q&A With JR Madden: Explosion-Proof Temperature Measurement
One of our customers uses ethylene for its process feed and has installed a new ethylene
terminal with an 18m3 storage tank.
Published: January 19, 2017

Product of the Month: STA Functional Safety Trip Alarm

Product of the Month: STA Functional Safety Trip Alarm
Risk reduction, reliability, and safety are important factors in the automated control of potentially hazardous processes such as the overpressure and containment of dangerous substances. Process Industry personnel are always aware of the need to protect people, the environment, and facilities as part of their overall risk management plan. A central strategy employed today includes safety instrumented functions (SIF), or functional safety, utilizing IEC 61511 standards. A crucial instrument in a safety instrumented system is the logic solver, which acts as a decision maker initiating the final action to make the process safe should the need arise.
Published: January 19, 2017

EHELP: STA Latching Checkbox

EHELP: STA Latching Checkbox

Q: We do not have sufficient PLC digital output spares to perform a Manual Reset of the three installed safety temperature controllers. We are going to remove the alarm latching on both limits and faults on our STA Functional Safety Alarm Trip. The Manual Reset radio button stays active in the STA configuration software. Will the latches clear after we are outside the dead band limits? 

Published: January 10, 2017

Moore Industries Delivers When a Client in the UK Needed Several SPA2 Units Fast

Moore Industries Delivers When a Client in the UK Needed Several SPA2 Units Fast
An American multinational oil and gas corporation with a subsidiary located in the UK recently needed several SPA2 units as an urgent requirement for a project.  The client needed the SPA2s A.S.A.P. and Moore Industries delivered.
Published: November 22, 2016

Remote I/O Solution for Boiler Temperature

Chemical and Specialty Chemical

Remote I/O Solution for Boiler Temperature

A large and long established chemical plant in New South Whales, Australia had been monitoring boiler tube thermocouples from multiple process boilers for more than 20 years. Originally all type K thermocouples were wired directly back to the DCS.  Over time they started to see drifting, errors and even out of range measurements due to the degradation of their long thermocouple extension wire runs. Learn how Moore Industries solved this problem.

Published: October 26, 2016
RSS
123