What's New


Blog


«October 2018»
MonTueWedThuFriSatSun
24252627282930
1234567
891011121314
15161718192021
22232425262728
2930311234

E-HELP: Using the CPA to Create a Temperature Switch

E-HELP: Using the CPA to Create a Temperature Switch
Q: I am looking for a device to create a temperature switch. I currently use a simple temperature switch with a 230°F setting, but at times the temperature of the unit goes over 400°F briefly and destroys the switch. I need to be able to hook a thermocouple up to the device and program a setpoint (with no display required) and have a set of dry contacts open when the temperature rises above the setpoint.
Published: September 18, 2015

TCS Handles Up to 32 Measurements...And More

TCS Handles Up to 32 Measurements...And More
Moore Industries’ TCS Temperature Concentrator System is an ideal solution for low-cost temperature measurements. At its heart is the 16-channel, loop-powered (2-wire) TCM Temperature Concentrator Module. When two TCM modules are used in a TCS, up to 32 signals can be monitored over one twisted wire pair. The TCM is approved for use in hazardous areas (Div 2/Zone 2 and Div 1/Zone 0/1) and can be used with an HMC (HART to MODBUS RTU Converter) when communication with a MODBUS RTU master is required.

Published: September 15, 2015

IPH2 Custom Output Ranges Help Copper Smelter Replace Instrumentation

IPH2 Custom Output Ranges Help Copper Smelter Replace Instrumentation
The IPH2 is an economical choice for converting current signal to a pneumatic signal to provide precise, proportional control of valves, actuators and other pneumatically-controlled devices. One of its key features is the wide range of input and output choices. It is available with 4-20mA or split range inputs and 22 standard direct and reverse output ranges. In addition, custom ranges are also available – a fact that helped the Belgian branch of a global copper group when upgrading their instrumentation.
Published: September 8, 2015

E-HELP: 3-Wire Options with the WORM

E-HELP: 3-Wire Options with the WORM
Q: Does the WORM Flexible Sensor RTD have a 3-wire option? If not, can I eliminate the fourth wire by jumping two of the parallel wires together?
Published: September 3, 2015

DIN-Rail Adapter Offers Convenient Solution for Cabinet and Field Installations

DIN-Rail Adapter Offers Convenient Solution for Cabinet and Field Installations

Our new G-Type DIN-rail adapter allows any Top Hat 33mm DIN-rail instrument to be immediately installed on an existing G-Type 32mm DIN-rail. Check out the new video with step-by-step instructions on how to assemble and install this clever solution.

Published: September 1, 2015
RSS
First 11121314151617181920 Last