What's New


Blog


«February 2018»
MonTueWedThuFriSatSun
2930311234
567891011
12131415161718
19202122232425
2627281234
567891011

Functional Safety Problem Solver Application Notes from Moore Industries

Functional Safety Problem Solver Application Notes from Moore Industries
When you add a single safety loop, have a few points to isolate or need to augment a larger Safety Instrumented System, Problem Solver application examples can help. They provide an at-a-glance example intended to convey solutions for particular application scenarios. Along with our white papers, this series of Problem Solvers for Functional Safety can be a useful resource for your functional safety project. 

Published: January 17, 2017

EHELP: STA Latching Checkbox

EHELP: STA Latching Checkbox

Q: We do not have sufficient PLC digital output spares to perform a Manual Reset of the three installed safety temperature controllers. We are going to remove the alarm latching on both limits and faults on our STA Functional Safety Alarm Trip. The Manual Reset radio button stays active in the STA configuration software. Will the latches clear after we are outside the dead band limits? 

Published: January 10, 2017

SPA2IS Controls and Monitors Wet Wells

Wastewater Treatment Application

SPA2IS Controls and Monitors Wet Wells
Municipalities often have several wet well locations around a city that pump waste from low lying areas up to main sewage veins that feed waste treatment plants.  Level instruments monitor the wet well level and controllers then engage the grinder pumps.  Since wet wells contain waste, volatile gasses such as methane require that these level instruments be rated for use in Class I, Div 1 environments.
Published: January 9, 2017

Moore Industries Belgium Gets a New Office

Moore Industries Belgium Gets a New Office
This past September, Moore Industries Belgium (MIB) moved from the office location they have occupied since the late 1990s to new facilities better suited meeting the needs of their customers.
Published: December 15, 2016

EHELP: Signal Conditioner with Multiple Inputs (RTD)

EHELP: Signal Conditioner with Multiple Inputs (RTD)

Q: I am looking for a signal conditioner that has multiple inputs (RTD) that can be averaged on one mA output.  What do you recommend?

Published: December 13, 2016
RSS
First 10111213141516171819 Last