What's New


Blog


«December 2017»
MonTueWedThuFriSatSun
27282930123
45678910
11121314151617
18192021222324
25262728293031
1234567

E-HELP: Adjustable Deadband Thermocouple Alarms

E-HELP: Adjustable Deadband Thermocouple Alarms
Q: We currently are using TCA Thermocouple Alarm units in our plant (model TCA/K-10MV/SX1/117AC/[STD]). The user’s manual says that the deadband is fixed at 1% of the input range. However, we need the TCA to trip at a set point of 190°F and reset at 180°F. Is this model capable of meeting this requirement and do you still manufacture this model?
Published: September 11, 2015

E-HELP: 3-Wire Options with the WORM

E-HELP: 3-Wire Options with the WORM
Q: Does the WORM Flexible Sensor RTD have a 3-wire option? If not, can I eliminate the fourth wire by jumping two of the parallel wires together?
Published: September 3, 2015

Boosting Signals With the ECT

Boosting Signals With the ECT
Q: I have an application where we are getting a very weak 4-20mA signal back to the pump control panel. Will using an ECT unit (model ECT/4-20MA/4-20MA/117AC-TX (ECD) help to boost my signal at all?
Published: August 25, 2015

E-HELP: SIX Maintains Passive Resistance Regardless of Power

E-HELP: SIX Maintains Passive Resistance Regardless of Power
Q: Will the SIX Signal Isolator/Converter pass input signals through if the output is disconnected? We will be replacing our DCS, so we need to know if the input side will continue to work while the DCS is disconnected.
Published: August 20, 2015

E-HELP: Splitter Options Depending on Your Power Source

E-HELP: Splitter Options Depending on Your Power Source
Q: We have been using the ECT-DIN in our applications where we need to split one 4-20mA input to two outputs. The model number for our current units is ECT/4-20MA/2X4-20MA/117AC/DIN. We now need to split a signal to three outputs. Do you have a product that will help us to do this?
Published: August 13, 2015
RSS
First 567891011121314 Last