What's New


Blog


«February 2018»
MonTueWedThuFriSatSun
2930311234
567891011
12131415161718
19202122232425
2627281234
567891011

Highly Flexible and Versatile Alarm Trips: SPA2

Highly Flexible and Versatile Alarm Trips: SPA2

Something happens—a signal peaks or falls—and you need to know. A limit alarm trip can trigger the response needed to maintain normal, and safe, operations. The Moore Industries SPA2 Programmable Current/Voltage and RTD/Thermocouple Limit Alarm Trips are excellent alarms for your most demanding applications.

Published: May 26, 2016

THE WNM Wireless Network Module Gets a Makeover Inside and Out

THE WNM Wireless Network Module Gets a Makeover Inside and Out

Our WNM Wireless Network Module now has both Serial and Ethernet interfaces conveniently included into one model and has been updated with a new, sleeker housing. The WNM provides accurate and reliable point-to-point and point-to-multipoint wireless connectivity between remote field sites when wires can’t be run for practical or economic reasons. It is a bi-directional, spread spectrum radio modem that delivers the flexibility and cost-saving advantages of wireless data transmission. 

Published: April 14, 2016

EHELP: Applying the SIX 2-wire Signal Isolator and Converter

EHELP: Applying the SIX 2-wire Signal Isolator and Converter

Q: I am evaluating the SIX 2-wire Signal Isolator and Converter. Is this device auto-calibrated or will we need to calibrate it ourselves? Does it require two separate power supplies? The specs state that the output is loop powered but I am not clear on the input. Also, is it a problem if we supply both the input and output with the same power source?  In our case, it would be the 53.5VDC power supply in the loop currently.  We would need to run a parallel path. The input is intended to be a 4-20mA.

Published: February 23, 2016

EHELP: Using the TRY or RBX to Get Temperature Measurements of Generator Windings

EHELP: Using the TRY or RBX to Get Temperature Measurements of Generator Windings
Q: We have been using your SPA series temperature transmitters in our hydroelectric power plants with excellent results. These devices have high protection against electromagnetic interference. We would like to purchase temperature transmitters for head mounting and rail mounting that have the same high level of isolation and protection against electromagnetic interference. The sensors are Cu10 three wires and they give the temperature of generator windings in the hydroelectric power plant.
Published: February 8, 2016

New SPA2IS Programmable Alarm Trip with Intrinsically-Safe (IS) Field Connections Reduces Installation and Maintenance Costs

New SPA2IS Programmable Alarm Trip with Intrinsically-Safe (IS) Field Connections Reduces Installation and Maintenance Costs

Moore Industries has released the new SPA2IS programmable alarm trips with built-in intrinsically-safe (IS) field connections. Now customers in the chemical, petrochemical, oil & gas extraction & refining and pharmaceutical industries that monitor, control, and measure signals in hazardous areas have an alarm solution that significantly reduces wiring, installation and maintenance costs. The newest member of Moore Industries' family of Limit Alarm Trips and Switches, the SPA2IS is a combination alarm trip and temperature transmitter solution that includes built-in intrinsically-safe field connections for current/voltage, resistance temperature detectors (RTDs), and thermocouple.


Published: February 4, 2016
RSS
First 567891011121314 Last