What's New


Blog


«December 2017»
MonTueWedThuFriSatSun
27282930123
45678910
11121314151617
18192021222324
25262728293031
1234567

DIN-Rail Adapter Offers Convenient Solution for Cabinet and Field Installations

DIN-Rail Adapter Offers Convenient Solution for Cabinet and Field Installations

Our new G-Type DIN-rail adapter allows any Top Hat 33mm DIN-rail instrument to be immediately installed on an existing G-Type 32mm DIN-rail. Check out the new video with step-by-step instructions on how to assemble and install this clever solution.

Published: September 1, 2015

535 Controller Can Take the Heat of Fire and Explosion

535 Controller Can Take the Heat of Fire and Explosion

Here's a quick story from Mark Kuhlman at Temco highlighting just how durable our products are - even in the most extreme conditions:

According to Mark, one of his clients had a coal mill explosion and fire in a plant where our 535 Controllers were in use. Fortunately, no one was injured, but damage to instrumentation and other equipment near the source of the incident was extensive.

Published: August 27, 2015

Boosting Signals With the ECT

Boosting Signals With the ECT
Q: I have an application where we are getting a very weak 4-20mA signal back to the pump control panel. Will using an ECT unit (model ECT/4-20MA/4-20MA/117AC-TX (ECD) help to boost my signal at all?
Published: August 25, 2015

E-HELP: SIX Maintains Passive Resistance Regardless of Power

E-HELP: SIX Maintains Passive Resistance Regardless of Power
Q: Will the SIX Signal Isolator/Converter pass input signals through if the output is disconnected? We will be replacing our DCS, so we need to know if the input side will continue to work while the DCS is disconnected.
Published: August 20, 2015

E-HELP: Splitter Options Depending on Your Power Source

E-HELP: Splitter Options Depending on Your Power Source
Q: We have been using the ECT-DIN in our applications where we need to split one 4-20mA input to two outputs. The model number for our current units is ECT/4-20MA/2X4-20MA/117AC/DIN. We now need to split a signal to three outputs. Do you have a product that will help us to do this?
Published: August 13, 2015
RSS
First 567891011121314 Last