What's New


Blog


«December 2017»
MonTueWedThuFriSatSun
27282930123
45678910
11121314151617
18192021222324
25262728293031
1234567

EHELP: Is there a Dual Signal Isolator Converter for Different Inputs?

EHELP: Is there a Dual Signal Isolator Converter for Different Inputs?
Q. As part of a power distribution process I need a dual signal isolator/converter/splitter that has an input of 0-1mA, outputs of 0-1mA and 4-20mA with 117VAC power input? It needs a DIN housing so it can be mounted in an existing cabinet.
Published: November 15, 2017

EHELP: Is there a signal conditioner with 0-2Vdc input & 2 isolated 4-20mA outputs?

EHELP: Is there a signal conditioner with 0-2Vdc input & 2 isolated 4-20mA outputs?
Q. Is there a signal conditioner with 0-2Vdc input and two isolated 4-20mA outputs with 24Vdc?  I need it as compact as possible because I need to install it horizontally in a cabinet. 
Published: July 26, 2017

EHELP: Can you help specify a splitter that can send the signal to both control systems?

EHELP: Can you help specify a splitter that can send the signal to both control systems?

Q. I have two different control systems and I need some splitters to split a 4-20 mA signal. I may need to have the loop isolated. Can you help specify a splitter that can send the signal to both control systems where I can use the splitter connected in a series on the original loop? My company has used the SIX in the past, would this work?

Published: July 12, 2017

EHELP: What is the maximum impedance that the output of an output loop powered ECT-DIN can drive?

EHELP: What is the maximum impedance that the output of an output loop powered ECT-DIN can drive?
Q. What is the maximum impedance that the output of an output loop powered ECT-DIN can drive?
Published: April 27, 2017

EHELP: Can the ECT-DIN, be configured for a 4-20mA input and 4-12mA split range output?

EHELP: Can the ECT-DIN, be configured for a 4-20mA input and 4-12mA split range output?

Q. Can the ECT-DIN, configured for 4-20mA input and 4-20mA output, be calibrated to give 4-12mA output when the input is 4-20mA so that the output is 1/2 the input? We have a radio I/O signal that is scaled to 4-20mA for 0-65, 535raw units. When sent to the PLC over Modbus, it can't be read properly since the maximum register value size for the PLC is limited to 32767.
Published: March 29, 2017
RSS
12