What's New


Blog


«November 2018»
MonTueWedThuFriSatSun
2930311234
567891011
12131415161718
19202122232425
262728293012
3456789

ISA’s Safety Instrumented System Design: Techniques and Design Verification

ISA’s Safety Instrumented System Design: Techniques and Design Verification

Moore Industries is proud to have its products, STZ Functional Safety Dual Input Smart HART Temperature Transmitter and the STA SIL 2 and SIL 3 Capable Programmable Current/Voltage and RTD/Thermocouple Safety Trip Alarms, highlighted in the contents of ISA’s Safety Instrumented System Design: Techniques and Design Verification.   

Published: November 7, 2018

STA: SIL 2 and SIL 3 Capable Programmable Current/Voltage and RTD/Thermocouple Safety Trip Alarms

STA: SIL 2 and SIL 3 Capable Programmable Current/Voltage and RTD/Thermocouple Safety Trip Alarms
Part of the Moore Industries FS FUNCTIONAL SAFETY SERIES, the exida® SIL 2 and SIL 3 certified STA Safety Trip Alarm performs as a logic solver and acts on potentially hazardous process conditions; warns of unwanted process conditions; provides emergency shutdown; or provides on/off control in Safety Instrumented Systems (SIS) and traditional alarm trip applications.
Published: October 31, 2018

TDY: PC-Programmable Temperature Transmitter with Display

TDY: PC-Programmable Temperature Transmitter with Display
Moore Industries’ universal TDY PC-Programmable Temperature Transmitter features a large integral display that shows real-time process status and valuable loop diagnostic information. Combining smart digital technology with advanced analog operation, the TDY delivers superior reliability, accuracy and ease of use.
Published: May 16, 2018

HTZ: Smart HART® Humidity and Temperature Transmitter

HTZ: Smart HART® Humidity and Temperature Transmitter
The HTZ Smart HART® Transmitter simultaneously measures humidity and temperature in industrial, commercial, manufacturing, and HVAC applications.
Published: May 2, 2018

CPT: PC-Programmable Temperature Transmitter and Signal Isolator/Converter

CPT: PC-Programmable Temperature Transmitter and Signal Isolator/Converter
The 4-wire (line/mains-powered) CPT provides an isolated and linear current or voltage output (any range within 0-20mA or 0-10V) proportional to the input. The signal is ready for direct interface with readout instruments, recorders, PLC, DCS, or PC-based SCADA systems.
Published: March 21, 2018
RSS
12345678910 Last