What's New


Blog


«December 2017»
MonTueWedThuFriSatSun
27282930123
45678910
11121314151617
18192021222324
25262728293031
1234567

STZ: Functional Safety Dual Input Smart HART Temperature Transmitters

STZ: Functional Safety Dual Input Smart HART Temperature Transmitters
Part of Moore Industries’ FS Functional Safety Series, the SIL 2 and SIL 3 capable STZ Functional Safety Dual Input Smart HART® Temperature Transmitters for your SIS (Safety Instrumented System) configures quickly and easily to accept a single or dual input from a wide array of sensors and analog devices.
Published: December 13, 2017

Now Available! Rear Terminal Kit for the TDZ3 and STZ HP

Now Available! Rear Terminal Kit for the TDZ3 and STZ HP

Moore Industries has released the Rear Terminal Kit for the TDZ3 and STZ HP.

Published: November 23, 2017

PSD: A Loop Indicator for All Applications and All Stockrooms

PSD: A Loop Indicator for All Applications and All Stockrooms

Most process loop indicators do a sufficient job indicating a process variable in the field.  But what happens when signals are from level transmitters that sit atop vessels where the level is not linear with volume and the loop indicator needs to display the volume?  Or what if yesterday’s installation area was a Div 2/Zone 2 location and today it’s a Div 1/Zone 0/1 location?  And what happens when you need to setup 50 loop indicators with tedious push button set up or a small HART handheld screen? 

Published: November 7, 2017

SPA2IS: Programmable Limit Alarm Trips with Intrinsically-Safe Field Connections

SPA2IS: Programmable Limit Alarm Trips with Intrinsically-Safe Field Connections
Programmable Limit Alarm Trips with Intrinsically-Safe Field Connections for Current and Voltage; RTD and Thermocouple (4-Wire).
Published: November 2, 2017

HCS: HART Concentrator System

HCS: HART Concentrator System
The HCS HART Concentrator System converts a HART digital signal to a serial (RS-485 or RS-232) MODBUS RTU communication protocol. This allows HART transmitters and valves to interface directly with MODBUS-based monitoring and control systems.
Published: October 26, 2017
RSS
12345678