What's New


Blog


«November 2018»
MonTueWedThuFriSatSun
2930311234
567891011
12131415161718
19202122232425
262728293012
3456789

EHELP: Need a Modbus RTU Serial Signal and Output Multiple Analog Outputs

EHELP: Need a Modbus RTU Serial Signal and Output Multiple Analog Outputs

Q: What product do you recommend that can take in a Modbus RTU serial signal and output multiple analog outputs? The serial signal can be from a fiber optic cable to remote devices or we can convert the signal from fiber optic to RS232 cable format.

Published: October 19, 2018

EHELP: Other Options to Mount ECA

EHELP: Other Options to Mount ECA
Q. We would like to use the ECA-DIN in a seismic application. In a worst case scenario of an earthquake, the ECA-DIN must retain its position. We are concerned about the robustness of DIN rail mounting. Is the ECA available with a bolt down option?
Published: February 14, 2018

EHELP: Signal Limiter and Alarm Trip

EHELP: Signal Limiter and Alarm Trip

Q. On a 4-20mA gas detector, while we replace the cell, the output reverts to 3mA. This causes the device receiving the 4-20mA signal to go into a critical alarm condition and can shut down a critical process. What device do you have that will keep the output at no less then 4mA? It would also be convenient to have this instrument provide me with a 'relay alarm contact output' when my input goes to 3mA. It can be 24Vdc or 120Vac. It should be in a DIN housing.

Published: January 17, 2018

E-HELP: Isolating Feedback on VFDs

E-HELP: Isolating Feedback on VFDs
Q: We are a boiler/burner company dealing with a rising amount of computer-based burner controls. We have installed several and have some blowers that are controlled by VFDs (Variable Frequency Drives). We have run into issues with noise on certain systems. We get occasional problems with 4-20mA feedback from the VFD despite going through the proper grounding techniques. We are wondering if installing an opto isolator on the feedback loop might eliminate our issue. We have used the SIX Signal Isolator many times on the signal going to the VFD to offset impedance issues on the VFD. Can we put an opto isolator on both signals?
Published: January 3, 2018

EHELP: Is there a Dual Signal Isolator/Converter/Splitter for Different Outputs?

EHELP: Is there a Dual Signal Isolator/Converter/Splitter for Different Outputs?
Q. As part of a power distribution process I need a dual signal isolator/converter/splitter that has an input of 0-1mA, outputs of 0-1mA and 4-20mA with 117VAC power input? It needs a DIN housing so it can be mounted in an existing cabinet.
Published: November 15, 2017
RSS
12345678910 Last