Oil & Gas: Downstream/Refining
Delays at refineries have a trickle-down effect in wasting resources that are on site and in getting finished products delivered.
Moore Industries offers a broad line of products to keep your processes and personnel safe with those shown below having
proven themselves as superstars in the Downstream Refining end of the oil and gas industry.
CSA, ANZEx and ATEX Approved I/P Transmitter Prevents Dangerous Conditions in Hazardous Natural Gas Applications
Key Product: IPH2/IPX2
Differential Temperature in a Heat Exchanger Key Product: RIY
Hard Alarm Required for Insurance Policy Key Product: SPA2
Multiple Ground Loops Plague Oil Refinery Key Product: NCS
Open Circuit Detection for 4-20mA Input Key Product: SPA2
Peer-to-Peer Distributed I/O Network Over Ethernet Key Product: NCS
Shutdown System Needed at Refinery Key Product: SPA2
I/P Conversion in High Vibration Environments Key Product: IPX
Use One Process Signal for Two Different Tasks Key Product: SPA2
Temperature Sensors, Transmitters and Assemblies - These products allow you to take weak, low-level RTD or thermocouple temperature signals and convert them to a high-level analog signal more appropriate for long distance transmission through a loud plant and ready for direct interface with your equipment.
TRY/TRX PC-Programmable Temperature Transmitters - These temperature transmitters (in isolated and non-isolated configurations) convert their input to a 4-20mA output that is ready for direct interface with readout instruments, recorders, DCSs and other computer-based SCADA systems.
Limit Alarm Trips and Switches - Provide on/off control, warn of trouble or provide emergency shutdown by sending one or more alarm (relay) outputs when a monitored process signal falls outside of a selected high and/or low limit.
Functional Safety (FS) Products - The FS series of products is designed and built in compliance with IEC 61508, the leading worldwide Functional Safety standard. Whether you are adding a single safety loop to protect your investment or people or need to augment a larger Safety Instrumented System (SIS), these instruments address your needs.
NCS NET Concentrator System - A workhorse in demanding industrial applications, the NCS provides a real-time signal gateway between field or factory floor and your control strategy.
ROUTE-MASTER RM100 Fieldbus System - For intrinsically-safe FOUNDATION fieldbus or PROFIBUS PA systems, the RM100 uses a patented split architecture design to deliver the highest segment current to hazardous areas and can power up to 16 fieldbus devices.
HIT/HIX HART Isolator - These HART® Isolators provide signal isolation and protection from surges, spikes and transients of up to 1500Vrms while allowing you to safely share the digital HART data from the output of a Smart HART transmitter with a secondary asset manager, control or recording device.