Chemical and Specialty Chemicals
The global improvements the chemical industry delivers come from a delicate, yet substantial, balance of continuous
process advancements and measurements. Drastic damage can occur if these balances are not kept in check. Moore
Industries offers a broad line of products that keep your continuous and batch processes optimized and personnel safe.
Monitoring Acid Level Temperatures Wirelessly
Key Product: WNM
Remote I/O Solution for Boiler Temperature
Key Product: NCS
SPA2IS Provides High Temp Shutdown for Chemical Vessel
Key Product: SPA2IS
The WORM Replaces Rigid RTDs at Nitrogen Plant
Key Product: WORM
Using the STA as a Safety Shutdown Device
Key Product: STA
CSA, ANZEx and ATEX Approved I/P Transmitter Prevents Dangerous Conditions in Hazardous Natural Gas Applications
Key Product: IPH2/IPX2
Papers and Articles
Logic for Tank Overfill Protection Key Product: STA
Get Rid of Rigid: Get the WORM Flexible Temperature Sensor Key Product: WORM
WNM Wireless Network Module - A bi-directional, spread spectrum radio, useable with Ethernet and Serial interfaces, that wirelessly transmits data when wires cannot be run for practical or economic reasons.
HCS HART Concentrator System - Converts a HART digital signal to a serial (RS-485 or RS-232) MODBUS RTU communications protocol allowing HART transmitters and valves to interface directly with MODBUS-based monitoring and control systems.
IPH2&IPX2 Type 4X and Explosion-Proof Current-to-Pressure (I/P) Transmitter - Accepts a 4-20mA input signal and converts it to allow control of pneumatic devices. It accepts natural (sweet) gas as its pneumatic supply.
Temperature Sensors, Transmitters and Assemblies - These products allow you to take weak, low-level RTD or thermocouple temperature signals and convert them to a high-level analog signal more appropriate for long distance transmission through a loud plant and ready for direct interface with your equipment.
WORM - A thermowell temperature assembly with a flexible sensor which can be cut to size in the field.
Functional Safety (FS) Products - The FS series of products is designed and built in compliance with IEC 61508, the leading worldwide Functional Safety standard. Whether you are adding a single safety loop to protect your investment or people or need to augment a larger Safety Instrumented System (SIS), these instruments address your needs.
STA Safety Trip Alarm SIL 2 and SIL 3 Capable Programmable Safety Alarm Trip - Part of Moore Industries’ Functional Safety (FS) series, the STA performs as a logic solver and acts on potentially hazardous conditions.
HIT/HIX HART Isolator - These HART® Isolators provide signal isolation and protection from surges, spikes and transients of up to 1500Vrms while allowing you to safely share the digital HART data from the output of a Smart HART transmitter with a secondary asset manager, control or recording device.